The TERK XM-6 outdoor antenna is a high performance antenna which can replace the home antenna that comes with many XM Radio home kits and receivers. The XM6 is weather resistant, can withstand years of abuse from the elements, and is designed to maintain better reception for maximum signal strength. The XM6 comes with a universal mounting bracket that can be installed to a wall, roof, or mast (including a satellite dish mast) and uses common RG-6 cable (not included).
Features:
- Weather-proof Outdoor XM Antenna
- Positioning Arm with adjustable swivel mounts allow for best signal reception
- Uses standard RG-6 cabling - Perfect for pre-wired buildings
- Single SMB connector adapter will plug into any XM home radio or boombox
- Hardware included - For installation to a wall, roof, or mast
Kit Includes:
- XM6
- Universal mounting bracket
- Threaded F-type SMB adapter
- Weather Boot
- Four 1 inch self-tapping screws
- 2 universal mounting bracket
- 2 U-bolts, 4 nuts
- 4 #10 screws
- Installation Manual
Compatible with:
- Pioneer XMp3 (Home/Car Cradle)
- Pioneer Inno (Home/Car Cradle)
- Samsung Helix (Home/Car Cradle)
- Samsung NeXus25 (Home/Car Cradle)
- Samsung NeXus50 (Home/Car Cradle)
- Delphi SKYFi3 (Home/Car Cradle)
- Delphi SKYFi2 (Home/Car Cradle)
- Delphi SKYFi (Home/Car Cradle)
- Delphi Roady XT (Home/Car Cradle)
- Delphi Roady 2
- Delphi Roady
- Audiovox Xpress (Home/Car Cradle)
- Audiovox Xpress EZ (Home/Car Cradle)
- Audiovox Xpress R (Home/Car Cradle)
- Delphi Xpress RC (Home/Car Cradle)
- Audiovox Xpress RCi (Home/Car Cradle)
- Audiovox onyX (Home/Car Cradle)
- Audiovox XR9 (Home/Car Cradle)
- Delphi MyFi (Home/Car Cradle)
- Pioneer AirWare (Home/Car Cradle)
- Giant Tao (Home/Car Cradle)
- Sirius XM MiRGE (Home/Car Cradle)
- AGT Sportscaster
- XM SkyDock (Car Cradle)
- XMPCR
- Polk XRt12
- Antex XM-100
- Antex XM-3000
- Altec Lansing XM3020
- Altec Lansing XM3120
- Delphi SA10001
- Delphi SA10201
- Delphi SA10034
- Delphi SA10205
- Belkin F5X007
- AGT XMB101UK
- Audiovox XB10
- Audiovox XB9
- SkyBox
- Cambridge Soundworks XM Playdock
Specifications:
- Antenna Dimensions: 2.99" W x 1.43" H x 3.54" D
- Mounting Base Dimensions: 3.34" W x 4.73" H x 2.08" D
- Weight: 1 lb
- Frequency: 2332.5-2345 MHz
- Bandwidth: 12.5 MHz
- Impedance: 50 ohms
- Polarization: LHCP (Circular)
- Gain: 30 dB, typical
- Noise Figure: 1 dB, typical
- Current Drain: 70 mA, max
- Arm Extension: 3.85" - 11.83"
Installation of the XM-6 antenna will additionally require RG-6 cable. It is available in 50-foot and 100-foot lengths. It is recommended to use an In-Line Amplifier for cable runs of 75 feet or more.
Click on an image below to enlarge it.
