XMT4 Advanced No Ground Plane Antenna For XM Satellite Radio Reception. For trucks with tow-style mirrors. The XMT4 truck antenna is XM approved and quickly mounts to any vertical or horizontal tube up to 1-1/10" diameter. For optimal performance, the antenna should be mounted vertically. This extremely versatile antenna can be mounted to any other vehicles such as RV's, off-road vehicles, maritime ships, and motorcycles.
Features:
- The Most Advanced XM Antenna Available.
- Mounts Anywhere & Meets/Exceeds XM Spec.
- No Ground Plane Required.
- Weighs Only Few Ounces.
- Can Be Used For Other Sat Radio Services (Sirius) with Limited Performance.
Kit Includes:
- Antenna Assembly (w/ attached cable & L-bracket)
- Indented Flat 2" Square Clamp (w/ 4 holes)
- 4 Sets of Hex Lock-Nuts, Washers, & Bolts
- 5 Pcs of Cable Tie Wraps
Specifications:
Electrical
- Frequency: 2332.5 to 2345.0 MHz
- Gain 2 dBic (20-60 deg elevation) -2 dBi (horizon)
- Bandwidth: 12.5 MHz
- Impedance: 50 ohms
- Polarization LHCP (20-60 deg elevation) Linear (Horizon)
LNA
- Gain: 30 dB, typical
- Noise Figure: 1.0 dB, maximum
- Power: 4.5 Vdc, nominal
- Current Drain: 60 mA, maximum
- Unwanted Signal Rejection: 40 dB, minimum
Cable
- Type: Coaxial RG-174
- Length: 16 feet
- Connector: 90 degree SMB
Mechanical
- Overall Height: 11.75 inches
- Effective Diameter: 0.75-0.82 inches
- Housing Material: Black ABS, UV Stable
- Mounting: Horizontal or Vertical Tubing 7/16" to 1" Diameter
- Rated Wind Velocity: 150 mph
- Weight: 0.25 Lbs w/out Cable
Temperature
- -40 C to +105 C, operating
- -45 C to +120 C, storage
Quality and Performance Tests
- XM Approved: Per Specification XM-TEC-3-0009-2-RD
This antenna is compatible all XM Satellite Receivers. NOT compatible with SKYFi car cradles with either a dual-lead connector or a pink Fakra connector.
