XMT4 XM Radio Mirror Mount Truck Antenna

XMT4 Advanced No Ground Plane Antenna For XM Satellite Radio Reception. For trucks with tow-style mirrors. The XMT4 truck antenna is XM approved and quickly mounts to any vertical or horizontal tube up to 1-1/10" diameter. For optimal performance, the antenna should be mounted vertically. This extremely versatile antenna can be mounted to any other vehicles such as RV's, off-road vehicles, maritime ships, and motorcycles.

Features:

• The Most Advanced XM Antenna Available.
• Mounts Anywhere & Meets/Exceeds XM Spec.
• No Ground Plane Required.
• Weighs Only Few Ounces.
• Can Be Used For Other Sat Radio Services (Sirius) with Limited Performance.

Kit Includes:

• Antenna Assembly (w/ attached cable & L-bracket)
• Indented Flat 2" Square Clamp (w/ 4 holes)
• 4 Sets of Hex Lock-Nuts, Washers, & Bolts
• 5 Pcs of Cable Tie Wraps

Specifications:

Electrical

• Frequency: 2332.5 to 2345.0 MHz
• Gain 2 dBic (20-60 deg elevation) -2 dBi (horizon)
• Bandwidth: 12.5 MHz
• Impedance: 50 ohms
• Polarization LHCP (20-60 deg elevation) Linear (Horizon)

LNA

• Gain: 30 dB, typical
• Noise Figure: 1.0 dB, maximum
• Power: 4.5 Vdc, nominal
• Current Drain: 60 mA, maximum
• Unwanted Signal Rejection: 40 dB, minimum

Cable

• Type: Coaxial RG-174
• Length: 16 feet
• Connector: 90 degree SMB

Mechanical

• Overall Height: 11.75 inches
• Effective Diameter: 0.75-0.82 inches
• Housing Material: Black ABS, UV Stable
• Mounting: Horizontal or Vertical Tubing 7/16" to 1" Diameter
• Rated Wind Velocity: 150 mph
• Weight: 0.25 Lbs w/out Cable

Temperature

• -40 C to +105 C, operating
• -45 C to +120 C, storage

Quality and Performance Tests

• XM Approved: Per Specification XM-TEC-3-0009-2-RD

This antenna is compatible all XM Satellite Receivers. NOT compatible with SKYFi car cradles with either a dual-lead connector or a pink Fakra connector.