This amplified splitter is optimized for use with all satellite radio systems. It includes the adapters, cables and accessories to permit operation of two satellite radios from a single antenna. In order to maintain the proper RF link budget for the radio, the splitter loss at 2.35 GHz has been compensated by an amplifier. This amplifier is powered by the DC voltage that is supplied by any of the radios connected to its output. For XM this nominal voltage is 4.5 VDC. For Sirius the nominal voltage is 6.5 VDC. The splitter is compatible with either satellite radio system. The splitter will pass the DC voltage supplied by a radio at any output port to the splitter input port. This will provide power to any antenna connected to this port for the antennas internal low-noise amplifier (LNA). Standard RG-6 cable with male F-connectors (not supplied) can be used to extend the output cable lengths. The splitter has 7 dB of excess gain to permit output extensions of up to 60 feet. If cable extensions greater than 60 feet are desired, we recommend using Pixel Model SBA-1 line extension amplifier(s) with the splitter. One amplifier (for example) placed at the input of the splitter will permit total cable lengths of up to 175 feet from each individual output port to the radios. For cable runs exceeding 250 feet between the antenna and splitter, the use of Model PS-1 power inserter is recommended to power the antenna and line amplifiers.
Package Includes:
Click on an image below to enlarge it.
