The AAI-GM9 allows direct interface of any preamp level audio source to a GM factory radio with a slave unit, eliminating the need for sound degrading solutions like an FM modulator. The AAI-GM9 interface inputs sources from units such as a DVD, VCP, MP3, Satellite Radio or Play Station.
OnStar Ready. When OnStar is initiated, the auxiliary audio inputs are automatically overridden to allow the OnStar audio to be heard. Unlike the 'cut and splice with relays' setup, with the AAI-GM9 you will never miss a phone call. The AAI-GM9 will work even if the vehicle does not have OnStar.
Features:
- Lower cost and higher quality sound than a FM modulator
- Perfect for SUVs like the Escalade, Tahoe, Suburban, Denali and Yukon
- Comes with a three position switch which allows you to switch between two auxiliary inputs and the factory slave unit
- High quality audio isolation IC eliminates engine noise
- Internal CMOS electronic switching for long term reliability
- Completely plug & play. Requires no external wiring
- Small size for easy installation (5" x 2" x 1")
Compatibility Requirements:
The sedan or SUV/truck factory headunit must have a separate working slave unit which uses the GM 9 pin connector (1995-2002 vehicles). Slave unit examples are: external CD changer, cassette player and/or single CD player. Please note that the slave unit must continuously be playing for the AAI-GM9 to work.
Use of a ground loop isolator SNI-1 might be necessary to correct poor sound quality when used in conjunction with the SKYFi Receiver.
Click on an image below to enlarge it.
