This kit includes the adapters, cables, splitter, amplifiers and impedance transformers to operate multiple satellite radios from a single standard antenna and allows the use of standard RG-6 cable for connections.
This kit has been designed to maintain the proper RF link budget for the radios and not degrade the C/N or BER (Bit Error Rate) of the received signal. The splitter loss at 2.35 GHz is overcome by the amplifiers gain located at the input to the splitter. The splitter is power passing on all ports (diode protected) and passes the DC output of the each radio to power the antenna and amplifiers. For RG-6 cable runs to or from the splitter exceeding 25 feet it is necessary to use additional amplifiers (Model SBA-1) to overcome cable loss and maintain proper signal levels. (See Figure 1 for guidelines). For cable runs exceeding 250 feet between the antenna and splitter, the use of Model PS-1 power inserter is recommended to power the antenna and line amplifiers.
Note: Actually kit may vary. Amplifiers may be contained within splitter.
Click on an image below to enlarge it.
